How To Save a Botched Batch of Grainy Fudge (2024)

FAQs

How To Save a Botched Batch of Grainy Fudge? ›

To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves. Then bring the fudge back up to the temperature specified in the recipe and follow the remaining steps. The flavor may be slightly diluted, but the texture will be improved.

If you discover that your mixture is grainy, some quick thinking will save the entire batch. Pour the fudge back into your pan, and add about a cup of water to it, along with a tablespoon or two of evaporated milk, whipping cream, or whatever cream you're using.

The solution? A fudge do-over. Even though it set up properly, I threw it back into a saucepan with about 1 1/2 cups of water and gently heated the mixture to dissolve the fudge into the water. From there, I pretty much re-did the whole cooking process.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. Use a candy thermometer or conduct a cold water test to check if the fudge is done. Do not rely on the cooking time indicated in your recipe.

Grab the saucepan that you initially used to cook the fudge and toss the fudge back in along with 1 ½ cups of water and a splash of cream. Adding some cream of tartar is a helpful way to keep the sugar crystals at bay as well — it's not essential, but if you have some, definitely pour a little in.

If your Tablet is grainy but not sugary but you'd prefer it to be just a little smoother then it is all down to the beating. Once you take your Tablet off the heat let it cool for 2 / 3 minutes and then beat it for a good 5 minutes vigorously.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

Beating before cooling

This fudge was beaten immediately after cooking, while it was still very hot. Its crystals are so big that it has practically reverted back to a sugar state!

In principle for traditional fudge you could re-heat it by adding more liquid so that the sugars dissolve. You would then need to evaporate the excess liquid (but don't exceed the soft-ball stage at 237 F/114 C) to recreate your supersaturated solution.

How to tell if fudge is ready without a thermometer? ›

Using a clean spoon, carefully take a little of the syrup and drop it into the bowl of cold water. Leave to cool for a moment then pick up the ball of syrup. If it's pliable, sticky and can be moulded in your fingers easily, it has reached the soft ball stage and the syrup can be used to make fudge and marzipan.

Let the fudge rest at room temperature for 15 minutes before placing in the refrigerator, uncovered. Refrigerate until the fudge is firm, about 2-3 hours (or overnight), before slicing and serving.

To fix oily, hard or grainy fudge, scoop the fudge back into a pot with about a cup of water. Cook it over low heat until the fudge dissolves. Then bring the fudge back up to the temperature specified in the recipe and follow the remaining steps. The flavor may be slightly diluted, but the texture will be improved.

If it's overcooked (resulting in grainy fudge) or undercooked (resulting in poor setting) all you really need to do is add a bit of cream, reheat the fudge to the target temperature, and let it set again.

If the temperature is too low, the fudge will be too soft and sticky, and if it's too high, it will turn into a hard, crumbly mess. The ideal temperature to cook fudge is between 232-234 degrees F (111-112 degrees C).

The problem is that crystals of sugar were re-introduced into the liquid candy. This will cause your candy to crystallize and become grainy. To prevent this, (stove-top method only) wipe down the inner sides of your pan a few times with a wet pastry brush while your candy is boiling.